Yes, the HappiJac Truck-Mounted Camper Tie-Downs # LC182905-182971 is confirmed to fit the 2007 Chevrolet Silverado with the new body, excluding the extended cab. Please note the attached review video. view full answer...
The install rails are indeed available separately as part # 4434. You can see the rails by clicking the provided link. If you don't already have a 7-way trailer connector installed in the bed of your truck, you can install one using part # 41157. I've linked you to videos showing the connector and the hitch being installed.
You can see current pricing by clicking the provided link. view full answer...
The rear mud flaps for the 2007 Chevrolet Silverado New Body would be the WeatherTech Mud Flaps - Rear Pair, part # WT120010. The rear mud flaps will not work on Dually vehicles.
If you need the front and the rear mud flaps together you can order the WeatherTech Mud Flap 4-Piece Set, part # WT110010-120010.
These mud flaps will fit vehicles with factory running boards, but will NOT fit vehicles with fender flares. view full answer...
We do offer Derale transmission coolers for the 2007 Chevrolet Silverado New Body with the 4.3L engine. These are shown on the linked page.
For an efficient Class III transmission cooler you can use Derale # D13503 which you will install using the required hose fitting kit # D13018. These install directly into your radiator so you'll not need to cut or flare any fluid lines.
Please refer to the linked video to see how this cooler installs. Two helpful articles are also linked for your... view full answer...
We have Front Mount Trailer Hitch Receivers from Draw-Tite # 65050, and from Curt # 31109 that both have a max vertical weight limit of 500 lbs. This is max rating I have been able identify from our suppliers. I do not find a custom bolt on front mount with a limit in excess of 600 lbs. view full answer...
The heads on the E16 slider and fixed hitches are slightly different so the leg kit you mentioned would not bolt up. The mounting bolts are off by 1/2 inch.
So what you'd need is the E16 part # C16115 for an all new Curt E16 hitch that includes new legs and head. view full answer...
Yes! The part you're looking for is the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black # AM20766. view full answer...